We are working on a new website. It is still under construction but you will be able to purchase off of this site in the future.
www.dixiegunworx.com
www.dixiegunworx.com
9/27/12
9/11/12
Winchester Model 70 .243 Rifle Custom Loads Accurized
New Thumbhole Laminate Stock w/ New Hogue Recoil pad.
Rifle action was pillar and glass bedded into the stock.
Timney 3 lb. trigger that can be adjusted.
Barrel was free floated
Bolt lugs lapped
Raceways, follower, chamber, feedramp all polished
11 degree target crown
Recessed Quick Disconnect sling mounts in stock
Nikon Buckmaster w/ BDC retical 4.5x14x40 Scope
This is my wife's personal rifle. She is having a very hard time selling it but wants to sell to build a different caliber. She shot at deer at 375 yards. You could put a baseball through the entrance wound and a softball through the exit. Busted both shoulder blades.
We have all of the load information with Velocity over 3,000 fps. Also have a chart we made for the scope that shows how high/low the bullet is hitting out to 450 yards.
We had a load for coyote's using 65 Grain bullets that was extremely accurate.
www.dixiegunworx.com (still working on...)
9/3/12
Remington 700 BDL .308
Custom built Rifle accurized by Dixie Gunworx.
- Stock is custom glass bedded with aluminum pillars.
- Barrel is free floated.
- Barrel is re-crowned to an 11 degree target crown.
- Chamber, raceway, feed ramp, and follower are polished.
- Bolt lugs are lapped and polished.
- Timney trigger installed.
- Custom talley quick disconnect scope mounts epoxy mounted and lapped to the receiver.
- 1/2" MOA
Scope:
Nikon Monarch 4-16x40mm
Custom load built by High Country Ammo. Load information is included with gun.
Subscribe to:
Posts (Atom)